Footprint Gamechangers Insoles (8/8.5) Dan Brisse Spider


Sold Out Low Stock

Footprint Gamechangers Insoles (8/8.5) Dan Brisse Spider

Key Features
  • Arch Support
  • Fully Stitched Shell
  • Gamechangers Custom Mold Instructions

Arch Support - These orthotics help prevent over-pronation, which assists the body in proper alignment. This relieves daily fatigue, sore joints and allows longer performance.

Fully Stitched Shell - Reinforced shell is blowout-proof thanks to full exterior stitching.

Gamechangers Custom Mold Instructions - Preheat oven to 225°F or 110°C

Insert insole for 5-8 minutes or until arch is soft

Wear socks

Remove insole and place into shoe. Walk for 5-10 minutes or until arch becomes firm.

Use caution, insole will be hot. If insole feels too hot, allow it to cool to tolerable temperature before molding.

Do not attempt to mold without adult supervision. If using a toaster oven, keep insole away from heating elements as toaster ovens do not accurately control even temperature throughout oven.

Do not attempt to mold if insole has been punctured or damaged. Do not use microwave. Use common sense.

Customer assumes all liability. Footprint Insole Technology is not liable for any injury as a result of using this product, negligent or otherwise.



1. Trim

Line up our stock insole and trim the toe if needed. If you have narrow shoes it is extra important to trim the side of the gamechangers opposite the arch.

2. Heat in the Oven

Heating to 225F for 8-10 minutes causes the inner arch chamber to soften and expand allowing the insole to take the exact shape of any arch.

3. Enjoy the benefits of a custom orthotic

Normally, as the muscles in your foot get tired or when taking heavy impacts, your arches will start to collapse. This leaves you prone to injury and soreness as your joints stop working in alignment.


  • increase balance.
  • stop the arch from collapsing (overpronation)
  • increase performance time.
  • prevent arthritis from uneven cartilage wear.
  • prevent acute injury such as torn ACL.

4. Moulding process

The insole takes the unique shape of the foot and becomes firm as it cools down. Firm enough to truly support the skeletal structure.

  1. Place in shoe and walk for a dynamic mold.
  2. Stand on the insole for solid mold.
  3. Sit and apply moderate pressure for an arch building mold.

5. Remold to new shoes

When moving from narrow to wide shoes or vice versa, Remold your gamechangers for the best fit.

This is not possible with lab made orthotics which makes Gamechangers a superior choice.


SKU fp.gamechangers.db.s.08
Brand Footprint Insole Technology

Others Also Bought

top seller

Footprint 7mm Insoles (7/7.5) Burman Atlas

top seller

Footprint 7mm Insoles (5/5.5) Burman Atlas


top seller

Footprint 7mm Insoles (8/8.5) Biebel King of Hollywood

More From This Category